Shower Upgrade 101 - Best Practices For New Unit Installation

Get A Free Estimate

Everybody has his or her own perception when it comes to How to Install a Shower Enclosure .

A successful shower setup needs mindful planning as well as a lot of work. Most of the times, you will need to do 3 types of tasks: mounting walls, mounting the plumbing, and completing wall surfaces.

Preparation

First of all, you have to choose the kind of shower that you desire to install. It is essential to establish whether the chosen shower is capable of handling particular systems and can control a risk-free degree of water through the boiler. A lot of shower devices nowadays are made to be adaptable to different water pressures (such as kept warm water and also cold mains).
It is likewise crucial to think about the water stress and also the planning of the piping and drain for the shower

Various Sorts Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be connected to the bath faucet according to your need, and also the water temperature level can be adjusted through the taps. Push-on mixers are cheap as well as very straightforward to mount. Nonetheless, although the hose connection is simple, it is easily removed. Furthermore, it is troublesome to change the temperature level.

Bath/Shower Mixer: The pipe as well as spray of this kind of shower are incorporated with a bathroom mixer faucet, as well as the temperature level can be changed with the bathroom faucets. It is an extremely affordable choice as well as no additional plumbing is included. Nevertheless, the bath/shower mixers also struggle with inconvenient temperature control options.

Guidebook Mixer: The pipe as well as spray of a hands-on mixer shower system belong of the wall surface system as well as the hot and cold water supplies are connected to a single shutoff The temperature level and also stress of the water are managed via either one or a selection of handles (in much more expensive showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more expensive than the previously stated mixers. They also need added plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The tube as well as spray of this shower type are a part of the wall surface system as well as the cold and hot water materials are connected to a solitary shutoff right here too. It is full with an integrated stabiliser to self-adjust the water temperature and also to stop it from ending up being too warm. One of the biggest benefits of a thermostatic mixer shower type consists of hassle-free temperature control. However, it is one of the most costly of the various mixer choices.

Power Shower: A power shower is a single device consisting of a powerful electrical pump that is capable of modifying both the water pressure and temperature level. This type of shower can be fitted if there is water from a cold water tank and a warm water cylinder. A power shower makes the change of both pressure and temperature level easy. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower kind to be installed, the keys pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature level and stress to be changed via a handle. Models with temperature level stabilisers are better as they continue to be unaffected by various other faucets elsewhere being used within the household. A significant drawback of electrical showers is that the control knob just enables the alternative of high temperatures at much less pressure, or reduced temperatures at a better pressure. This is bothersome in the winter when the spray is commonly weak and the keys water is colder. Nevertheless, this trouble is dealt with in some versions which are offered with a winter/summer setup.

Method

Relying on the type of shower you want to install, the shower head need to either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
Before beginning, it is advisable to mark the placements of the shower head and control, as well as to intend the pipe-work included. In addition, the drainage system to eliminate the drainage will need to be intended. Both positions of the cord course and the shower switch will certainly additionally need to be considered if an instant or electrical shower device is being mounted.
Use the instruction guide supplied with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is necessary to remove the water supply. In order to protect the pipes, they ought to be provided a water resistant covering and likewise fitted with separating shutoffs. The pipelines can after that be hidden right into the wall surface and also smudged over to neaten the total appearance.
Fit the base tray, shower head, and also installations.
Attach the main shower control to the pipelines that will certainly be providing the water (This may need a women screw string adapter).
Reconnect the water system as well as examination the pipelines for any type of leakages, as some may need tightening up.
If you are setting up an electrical shower, keep in mind to switch off the electrical power supply before making any electrical connections. Once these links have actually been made (there need to be support within the user's manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a better elevation (often as low as 150mm (6inches)) by fitting a strong wood assistance underneath it - potentially composed of struts and blockboards. If you pick this alternative, the primary as well as distribution pipes will likewise have to be raised to fulfill the brand-new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it should be connected right into the power supply in order to run.

Piping and Drainage

It is best to make use of 15mm size supply pipes, and make the go to the shower as short and straight as feasible so regarding preserve maximum stress as well as minimise warmth loss. In addition, by minimising making use of arm joints for pipe corners, you can lower the resistance in the circulation of the supply of water. You can attain this by bending the pipes rather.

Many Common Blunders

Breaching or disregarding neighborhood code limitations.

Using pipelines that are as well small.

Affixing copper to galvanized without using a brass or dielectric suitable between the two.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your components when installing them.

Not installing an air space filling for components.

Cutting supply stub outs also short to mount the shutoff valves onto after the completed wall surface is in place.

Not appropriately aligning tubes into installations or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leak.).

When transforming the water back on in your home, constantly run the outside tube valve or flush your bathrooms to hemorrhage dirt and also air from the lines. This debris can create issues in your sink taps as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very eager about How to Build a Shower Enclosure for Your DIY Bathroom and I really hope you appreciated the new piece. Sharing is good. You won't know, you may be helping someone out. Thank you so much for taking the time to read it.

Set Up An Appointment